150mm Digital Vernier Caliper

1)150mm Digital Vernier Caliper 2)Display:LCD Screen 3)Measuring Speed:1.5cm/sec 4)Stainless Steel

150mm Digital Vernier Caliper

 

1. Has finely honed jaws for exacting inside, outside and depth measurements 2.Measures both ID and OD in inches and millimeters

3.With accuracy to 1/20 mm and 1/128"

4.Slide and lock included; comes in a protective wood box

5.Total length: 9 1/4"

6.Maximum Opening: 6"(150mm)

 

Falure	Cause	Measure
Display flashes	Low battery	Replace battery
Display does not change when  slider is moved	System locked	Remove battery and replace after 30 seconds  to reset system
Accuracy less than +/-0.001mm	Dirt in the sensor	Remove slider cover and its assembly, clean  with compress air 5kgs/cm2
No display on LCD	1.improper battery    position 2. Low battery	1. Remove battery cover and check battery  position  2. Replace battery.

•APPLICATIONS

1.Operation : slider can be removed only after the locking screw (#10) is loosened.

2.Basic measuring methods : 

1) loosen the locking screw

2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.

 Pressing "MM/INCH" button after measurement will display the sae / metric conversion.

3)To reset display to zero, close external measuring jaws, then press "ZERO" button.

150mm Digital Vernier Caliper